1.
2.
Charging The Helicopter
Charge Connector
(from Transmitter)
1.
Pull off the cover and take out the charging wire
2.
Turn off the helicopter. Insert the charging plug
into the socket on the helicoper (1).
3.
The green LED will light up when charging (2). When
charging is completed, the LED will turn off.
Remove the plug from the socket on the helicopter.
4.
The helicopter should have about 5-6 minutes of fl ight
time after 20-30 minutes charging.
Note:
Before you recharge the battery, wait for
10-15 minutes to let the battery cool down.
-
Set the band on transmitter the same on the helicopter (A,B or C).
-
Set the ON/OFF switch on helicopter to ON, the power indicator will fl ash, BE SURE THE
TRANSMITTER IS “OFF” when turning on the helicopter.
-
Place the helicopter on the ground with the tail pointing towards you and the nose facing
away from you.
-
Set the left stick on transmitter to MINIMUM throttle, and then switch the power on.
Flying The Mini Copter