www.ikancorp.com | 713.272.8822 | [email protected]
because we’re
filmmakers
too
CAUTION
Disconnect power before cleaning or maintenance.
CLEANING
Frequent cleaning is recommended to insure proper function, optimized light output, and an extended life. The frequency
of cleaning depends on the environment in which the fixture operates: damp, smoky, or particularly dirty environments
can cause greater accumulation of dirt on the fixture.
Never use alcohol, solvents, or ammonia- based cleaners.
MAINTENANCE
Regular inspections are recommended to insure proper function and extended life. There are no user serviceable parts
inside this fixture. Please refer all other service issues to an authorized Ikan service technician. Should you need any spare
parts, please order genuine parts from your local Ikan dealer.
Please refer to the following points during routine inspections:
- Be sure all screws and fasteners are securely tightened at all times. Lose screws may fall out during normal operation
resulting in damage or injury as larger parts could fall.
- Check for any deformations on the housing, rigging hardware and rigging points (ceiling, suspension, trussing).
Deformations in the housing could allow for dust to enter into the fixture. Damaged rigging points or unsecured rigging
could cause the fixture to fall and seriously injure a person(s).
- Electric power supplies and cables must not show any damage or fraying. Never remove the ground prong from the
power cable.
LCX21 Specifications
Some other products that work well with this item available from Ikan include:
LBD20
IOC-713
IOC-1053
SW-04
Barn Doors for Lyra 1 x 2 Studio Light
Iron C-Clamp with 1/2-inch Attachment Bolt
Light Mounting Accessory Baby 5/8” / Junior 1 1/8” (TVMP)
Safety Wire
Light Source
RGBW LED’s
Lens
1/2-stop Diffusion
Beam Angle
110 degrees
Control/Dimming
DMX & Local Knob Control
Build Material
Metal & Plastic Shell
Cooling System
Active Cooling
Yoke
Baby 5/8” - Junior 1 1/8” Combo Pin
Fixture Size
28.4 x 20.5 x 7.2 in
Fixture Weight
32.5 lbs
Power Supply
Input: 100-240 VAC
Output: 30 VDC
Fixture Power Consumption
300 Watts
Optional Accessories
- 10 -
