Specifications
Cleaning & Maintenance
CAUTION! DISCONNECT POWER BEFORE CLEANING OR MAINTENANCE
CLEANING
Frequent cleaning is recommended to insure proper function, optimized light output, and an extended life. The frequency of
cleaning depends on the environment in which the fixture operates: damp, smoky, or particularly dirty environments can cause
greater accumulation of dirt on the fixture.
Never use alcohol, solvents, or ammonia- based cleaners
MAINTENANCE
Regular inspections are recommended to insure proper function and extended life. There are no user serviceable parts inside
this fixture. Please refer all other service issues to an authorized ikan service technician. Should you need any spare parts,
please order genuine parts from your local ikan dealer.
Please refer to the following points during routine inspections:
Be sure all screws and fasteners are securely tightened at all times. Lose screws may fall out during normal operation resulting
in damage or injury as larger parts could fall.
Check for any deformations on the housing, rigging hardware and rigging points (ceiling, suspension, trussing). Deformations in
the housing could allow for dust to enter into the fixture. Damaged rigging points or unsecured rigging could cause the fixture
to fall and seriously injure a person(s).
Electric power supplies and cables must not show any damage or fraying. Never remove the ground prong from the power cable.
LBX15 Fixture Specifications
Head Type
Bi-Color 3200K-5600K
Lens
½ Stop Soft Diffusion
Beam Angle
110°
Control/Dimming
DMX & Local Knob Control
Build Material
Metal & Plastic Shell
Cooling System
Fan Off: Passive
Fan On: Active
Yoke
Baby 5/8" - Junior 1 1/8" Combo Pin
Fixture Size
24 x 5 x 26 In.
Fixture Weight
19 lbs
LBX15 Electrical Specifications
Power Supply
Input: 100-220VAC
Output: 27.2VDC
Fixture Power
Consumption
212 Watts
LBX25 Fixture Specifications
Head Type
Bi-Color 3200K-5600K
Lens
½ Stop Soft Diffusion
Beam Angle
110°
Control/Dimming
DMX & Local Knob Control
Build Material
Metal & Plastic Shell
Cooling System
Fan Off: Passive
Fan On: Active
Yoke
Baby 5/8" - Junior 1 1/8" Combo Pin
Fixture Size
32 x 5 x 30 In.
Fixture Weight
28 lbs
LBX25 Electrical Specifications
Power Supply
Input: 100-220VAC
Output: 30VDC
Fixture Power
Consumption
303 Watts
Cooling System
When the fan switch on the back of the light is switched to OFF the light will be in passive cooling mode. In this mode the light
will only go to a max of 80% brightness. When the fan switch is to ON the light will be in active cooling mode, which enables
the light to be used at 100% brightness.
