Fixture Overview
DMX Channel
The DMX channel selection can be made from the back of the fixture using the large yellow knob to dial in the correct DMX
number. When a DMX signal is detected on the fixture, all other controls are closed down and only DMX channel control can
be selected on the rear of the fixture.
Depending on DMX channel selected a bi-color light will require two channels for use on the DMX board.
100% will be the 5600K color output. 0% will be the 3200K color output. The middle position will be 4600K color output.
Fixture Menu
ON-BOARD SYSTEM MENU
The fixture comes with an easy to navigate system menu. The next section will detail the functions of each command in the
system menu.
LCD MENU CONTROL KNOB
The control knob allows for local control as well as control from DMX board. The local control gives the user adjustment from
10%-100% in brightness. All Lyra Studio lights are bi-color fixtures, this allows the user local knob control. It gives the user the
ability to switch from 3200K -5600K just by pressing down on the large yellow dial. The user can also adjust the DMX channels
1 thru 512 by pressing down again on the large yellow dial.
LBX15
LBX25
Channel
Brightness
Color
5&6
Ch 5
Ch 6
