8
2016 Beholder
®
All Right Reserved
STEP 1
Mount the camera quick release
•
Remove the quick release plate from the gimbal.
•
Attach the quick release plate to the camera (Fig. 4). Be careful not to twist it too tight at this point.
•
Make sure the quick release plate direction is facing forward toward the lens.
Fig. 4. The camera is attached to the quick release plate
Camera Installation and Balance
▲
WARNING
Before installing the camera and adjusting the balance, remove the camera lens cover, attach the lens
hood, and insert a memory card and camera batteries, as well as any other accessories. The camera should
be fully ready to shoot.
