9
2016 Beholder
®
All Right Reserved
STEP 2
Install the camera on gimbal base
•
Install the camera with quick release mounted into the Beholder MS-‐PRO bottom mount base (Fig.5).
•
Slightly adjust the position of the camera into the base until you find a horizontal balance.
•
Shift the camera as close to the pitch motor as possible. Use the base plate positioning if needed.
•
Tighten the thumb screws.
•
Use a screwdriver to tighten the 1/4 quick release screw.
STEP 3
Adjust the gimbal roll – left and right balance
•
Release the roll thumb M4 screw and make the arm to be the shortest then tighten the M4 screw.
•
Slide the roll arm left or right until the camera finds a balance position and doesn’t lean left or right.
•
Tighten the thumb screws.
