IKA ULTRA -TURRAX, Руководство по эксплуатации

Страница: 13 / 52

13
Unpacking
• Unpack:
- Please unpack the device carefully
- In the case of any damage a fact report must be set immedi-
ately (for post, rail or forwarder)
• Delivery scope:
- Tube Drive
- Power supply unit
- Removal hook
- Operating instructions
- A warranty card.
Correct use
• Use
Application Volume Mode

with Tube ST-20...

with Tube ST-50...
Mixing
Stirring 2 - 15 ml
15 - 50 ml Seconds and
minutes mode

with Tube DT-20...

with Tube DT-50...
Dispersing
Stirring 5 - 15 ml
15 - 50 ml Seconds and
minutes mode

with Tube BMT-20...

with Tube BMT-50...
Crushing
Mixing
wet/dry 2 - 15 ml
15 - 50 ml Seconds and
minutes mode
• Range of use (indoor use only)
- Laboratories - Schools
- Pharmacies - Universities
This device is suitable for use in all areas except:
- Residential areas
- Areas that are connected directly to a low-voltage supply net-
work which also supplies residential areas.
The safety of the user cannot be guaranteed:
- If the device is operated with accessories that are not supplied or
recommended by the manufacturer
- If the device is operated improperly contrary to the manufacture’s
specifications
- If the device is operated improperly contrary to the manufacturer’s
specifications.
Useful facts
Changes in viscosity and volume caused by processing of disper-
sion media may cause small fluctuations in the speed of the device.
Pay attention to the ambient conditions listed in the “ Technical
Data ”.
Commissioning
Position the rotating knob (B) at the left stop
before starting up.
If these conditions are met, the unnit is rea-
dy for service when the mains plug has been
plugged in.
Switching on:
Press “Power” button (A).
Previous mode and time settings will be dis-
played e.g. :
(Factory setting: -2)