IKA MATRIX DELTA PLUS, Руководство пользователя

Страница: 13 / 20

24 25
/// Menu details
Tempering:
Control rate:
In the "Control rate" menu option, you can select the desired control rate between "Fast", "Mod-
erate" and "Slow"� A check mark (√) indicates the control rate is activated�
Fast: Fast tempering with a certain level overshooting�
Moderate: Moderate tempering with minimal overshooting�
Slow: Precise tempering without overshooting�
/// Menu structure
Factory setting
C ...
A B
√ Mode A
- B
- C
Safety Password 000
- Program Program 1
- Program 2
- Program 5
- ...
√ Tempering Control rate Fast
- Moderate
- Slow
Timer 00:00:00 [hh:mm:ss] Timer / Counter
Start Condition
Immediately √
Set Temperature Reached -
White -
Firmware Update Information
√
°F -
Display Background Black
√
√ Sound Key Tone
Factory Settings
Firmware Update Information yes
√
Languages Settings English
Deutsch
-
... -
Units °C
√
Temperature
Version Information Software 1.02.003/1.01.021
Menu
√
Graph Axis scaling
Automatic
Minimum
110.0 °C
5 minutes
Manual Maximum
-10 °C
X-Axis
Y-Axis
Timer:
In the "Timer" menu option, you can set "Timer / Counter" for "Tempering"�
You can set "Timer" value from 00:00:01 [hh:mm:ss] to 99:59:59 [hh:mm:ss]�
The tempering function stops automatically after the set time has elapsed and the set time
appears on the display�
Note: If the tempering function is stopped before the set timer value expires, the reverse
counting of the timer is interrupted�
If you set the "Timer" value to 00:00:00 [hh:mm:ss], the counter is active�
The counter automatically starts to run fom 00:00:00 [hh:mm:ss] upto 99:59:59 [hh:mm:ss]�
When the maximum value is reached, the device stops the tempering process�
In the menu option, you can set the timer / counter "Start contidion" as:
Immediately: The timer / counter starts immediately when starting the tempering function�
Set temperature reached: The timer / counter starts only when the set temperature reached�
C ...
A B
Mode:
Mode A:
After power on / power failure no automatic restart of functions�
Mode B:
After power on / power failure automatic restart of functions, depending on previous settings�
Mode C:
Set values (set in mode A or B) cannot be changed� After power on / power failure automatic
restart of functions, depending on previous settings�