IKA C-MAG HS7, Руководство пользователя

Страница: 22 / 220

22 Start-up
Start-up
/// Operation
Remove the protective film from the plate before using device!
Power-up
1.
Press the power button (A) to the right.
2.
Insert the power cord into the power outlet (J) .
3.
Press the power button (A) to the left.
› Standard mode A is selected.
Heating
1.
Set the safety temperature limit (11) .
2.
Set the target temperature using the rotating knob (C) .
› The set temperature value (02) is shown on the display (H) .
3.
Set the temperature control mode (09) .
4.
Press the rotating knob (C) to start the heating function.
General heating information
› The target and current temperature (02, 07)
are shown permanently on the display (H) .
› When the heating function is switched on,
the heater activated symbol (06) is displayed.
› When the device is switched off while the heating plate temperature
is higher than + 50 °C, the display (H) shows HOT! and the current
temperature (07) is shown, even if the device is switched off.
Stirring
1.
Set the speed using the rotating knob (D) .
› The set speed value (01) is shown on the display (H) .
2.
Press the rotating knob (D) to start the stirring function.