IKA 0020016017, Руководство по эксплуатации

Страница: 11 / 60

11
Power supply
Input V 100 ... 240
A 0.8
Hz 50 / 60
Output Vdc 24
W 24 (Limited power source)
Protection class 2 (double insulated)
Shaker
Operating voltage Vdc 24
mA 800
Power consumption, normal operation W 20
Power consumption, standby operation W 2
Motor-output power W 8
Drive EC - motor
Speed range rpm 0/100 ... 3000
adjustable in tens steps
Speed adjustment rotating knob in front
of the device
Speed display digital
Agitation stroke mm 4.5
Shaking motion horizontal, circular
Perm duration of operation % 100
Timer mode seconds 1 sec ... 59 min 59 sec
mode minutes 1 min ... 59 h 59 min
Timer display digital
Perm ambient temperature °C +5 ... +40
Perm. relative humidity % 80
Protection type acc. to DIN EN 60529 IP 21
Contamination level 2
Overvoltage category II
Operation at a terrestrial altitude m max. 2000
Interface RS 232
Technical data Maintenance
The appliance is maintenance-free.
For cleaning, disconnect the main plug!
Use only cleaning agents which have been approved by IKA to clean the
devices: water (containing surfactant) and isopropyl alcohol.
- Wear protective gloves while cleaning the devices.
- Electrical devices may not be placed in the cleansing agent for the purpose of
cleaning.
- Do not allow moisture to get into the device when cleaning.
- If a different cleaning or decontamination method than the method defined
by IKA is planned, the user must ascertain with IKA that this method does not
damage the device.
Spare parts order
When ordering spare parts, please give:
- Machine type
- Manufacturing number, see type plate
- Item and designation of the spare part, see spare parts diagram and spare
parts list, see www.ika.com .
Repair
Please only send devices in for repair that have been cleaned and are
free of materials which might present health hazards.
For this, use the “ certificate of compliance ” form which you can obtain
from IKA or can download a version for printing from the IKA website at
www.ika.com .
If your appliance requires repair, return it in its original packaging. Storage
packaging is not sufficient when sending the device - also use appropriate
transport packaging.