background image

UNO Synth

 Pro

Introduction

         3

Introduction

Thank you for purchasing UNO Synth Pro.

In The Box

•  UNO Synth Pro
•  USB cable
•  Power Supply (not on Desktop version)
•  Registration Card with QR Code User Manual

Register Your UNO Synth Pro

By registering, you can access technical support, activate your warranty and receive free JamPoints™, which 

will be added to your account. JamPoints™ allow you to obtain discounts on future IK purchases! Registering 

also keeps you informed of all the latest software updates and IK products.

Register at: 

www.ikmultimedia.com/registration

Precautions

Locations
Using the unit in the following locations can result in a malfunction: 

•  In direct sunlight
•  Location of extreme temperature or humidity 
•  Excessively dusty or dirty locations
•  Locations of excessive vibration
•  Close to magnetic fields

Power Supply
Please use only the USB cable or the Power supply provided with the unit and connect the cable to the correct 

POWER port on the device.

Interference with other electrical devices
Radios and televisions placed nearby may experience reception interference. Operate the unit at a suitable 

distance from radios and televisions.

Содержание UNO Synth Pro







































Отзывы: