UNO Drum
4 – Front panel interface
31
If the Clock is set to MIDI or USB and a clock signal is received, the knob selects as follow:
1:1: normal tempo (if a tempo of 120 bpm is received, units will play at 120 bpm)
1/2: one half tempo (if a tempo of 120 bpm is received, units will play at 60 bpm)
1/4: one quarter tempo (if a tempo of 120 bpm is received, units will play at 30 bpm)
UNO will automatically transmit MIDI Beat Clock and sequence start/stop messages from its MIDI Out to allow
the synching of two or more UNO units simply by patching the MIDI Out from the master unit to the MIDI in of
the slave unit.
4.3 – Play/Program Section
The PLAY/PROGRAM is where the triggers are, such as the PADS, the SEQUENCER, and the relatively fast
controls. This section can be divided in 4 parts.
On the right of this section, the 3 editing buttons in a grey outline are located, and they are RANDOM, COPY/
PASTE and CLEAR.
RANDOM:
MIDI Effect - the random function gives the possibility to randomize an elements pattern each time it
is pressed.
• To randomize an Elements pattern, hold RANDOM and select an element. A random pattern will populate
the sequence. The function will randomize not only the step position but also the velocity of the steps.
• To randomize all the element patterns, hold RANDOM and press SELECT ALL. Now all the elements will be
randomized.
COPY/PASTE:
this function gives the possibility to copy steps and patterns.
• To copy and paste a step, REC needs to be active. Hold COPY/PASTE and press desired step to copy it.
The button will now blink to indicate that the buffer is full. To paste it in another step, hold the destination
step and press COPY/PASTE again. It is possible to Paste the same Step on the element pattern until the
buffer is cleared with the CLEAR button.
• To COPY/PASTE the element pattern hold COPY/PASTE and press the element pad you want to copy
(display will show “EL” blinking 3 times, then goes back to the last showed parameter). The button will now
blink to indicate that the buffer is full. Change pattern pressing PATTERN and using the DATA ENCODER.
Press COPY/PASTE again to paste the pattern in the element.
• To copy and paste a Global pattern in song mode, REC needs to be inactive and SONG needs to be
active. Hold COPY/PASTE and press the step where the source pattern is located. The button will now
blink to indicate that the buffer is full. Hold the destination step where you want to copy a pattern and press
COPY/PASTE to paste the pattern in the step.
