English
27
Troubleshooting
Sound is distorted.
Check that the input level on iRig Stream Pro has been set properly. If the signal LED is red (HIGH) when you
stream your audio, decrease the input level as described in this guide.
I don’t get any sound.
In order for iRig Stream Pro to turn on, a Core Audio-compatible audio app must first be launched on your iOS
device or Mac.
• iOS: be sure you are using an app that works with audio input from the Lightning dock connector.
• Mac: be sure you have set “iRig Stream Pro” as the audio input device on the audio app you are using.
A “phasing” sound is present while monitoring the incoming signal.
If a “phasing” effect is present, you can disable the input monitoring from your recording app or switch off the
direct monitor switch on iRig Stream Pro.
Phantom power doesn’t turn ON.
Check that you have inserted working AA batteries in iRig Stream Pro battery compartment, or that you’ve
connected iRig Stream Pro to an external power supply.
No sound is playback thru the connected headphones.
Use the headphones thumbwheel to set the volume and check the volume of the connected host: you can
control the volume of the host with its volume buttons.
Specifications
Common
Type: 2 in/2out or 4 in/2out
Conversion: 24-bit A/D, 24-bit D/A
Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Power: USB bus powered. 48V operations with iOS devices require battery or DC IN. When connected to an
external PSU (iRig PSU 3A, not included), iRig Stream Pro charges the connected iOS lightning device.
Metering: 3x LEDs for overall streaming signal. Peak meter for Mic/Inst input.
Device Connection: mini-DIN
Dimensions: 123 mm/4.84” x 67 mm/2.63” x 40 mm/1.57”
Weight: 146g
Line input
Connector: 2x RCA (unbal.) Left/Right
Nominal Input Level: -10 dBV
Head Room: 10 dB - Level @ max
Input Impedance: 16.5 kOhms
Frequency Response: from 20 Hz to 20 kHz (-1.5 dB)
Signal to Noise Ratio: 84 dB - Level @max
