English
19
3. To confirm your selection, push and hold the “Mic/Inst Mute” button for 3 seconds. The button will remain lit
green (low intensity) to indicate that you are currently in multichannel mode.
PUSH AND HOLD
>3sec
Multichannel
mode
selected
Light
GREEN
Repeat the steps above to change operation mode per your needs.
HINT: make sure to change the operation mode (stereo or multichannel) before opening your recording/
streaming App. This because each time you’ll change the operation mode, the interface will restart itself.
Multichannel operations
In order to use the multichannel functionality, a DAW or an App that supports multitrack recording is needed. If
you’re using an App make sure to set it to run in Background, this allows you to use it while you’re using other
Apps (such as streaming Apps).
The multichannel operation is particularly useful when you want to stream a processed signal from the Mic/Inst
or Headset input to your audience.
IMPORTANT NOTE: please note that some streaming apps may exhibit some anomalous behavior in the
management of multichannel interfaces. For example, Apps like Facebook for iOS/Android, will only support
channel 1 as input of the audio streaming: this prevents from stereo streaming.
In this case, we suggest to use the iRig Stream Pro as a 2 channel interface. The same if you wish to use the
iRig Recorder App: since this App will only recognise input 1 and 2. For multichannel operation, a different App
is needed, such as: AmpliTube or VocaLive.
