Iiyama ProLite XU2792UHSU, Руководство пользователя

Страница: 18 / 36

ENGLISH
BEFORE YOU OPERATE THE MONITOR 13

Signal Timing
Change to the desired signal timing listed on page 31: COMPLIANT TIMING.
COMPUTER SETTING

For optimal viewing it is recommended to
position yourself directly opposite to the full face
of the monitor, then adjust the monitor’s height
and angle to your own preference.

Hold the panel so that the monitor does not topple
when you change the monitor’s height or angle.

You are able to adjust the monitor's height up
to 130mm, angle up to 45° right and left, 22°
upward and 5° downward.

Do not touch the LCD screen when you
change the height or the angle. It
may cause damage or break the LCD
screen.

Careful attention is required not to pinch
your fingers or hands into the moving
part of the stand when you change the
height or the angle.

Injury can occur if care is not taken to
avoid finger contact with the displays
base when adjusting the height.
NOTE
Monitor
Stand
130mm
45° 45°
DISCONNECTING YOUR MONITOR
Ensure that both the computer and the monitor are switched off.
Disconnect the power source first and then the Power Cable from the monitor.
Disconnect the audio cable from the computer and the monitor.
Disconnect the USB cable from the computer and the monitor.
Disconnect the signal cable from the computer and the monitor.
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite XUB2792UHSU