P9
8
Setting the Clock
1.
Press and hold
the
Time Set Button
on the bottom of the unit for 3 seconds until the
clock display flashes and a beep sounds.
2. Press the
–
or
+ Buttons
to adjust the clock to the current time (hold for rapid setting). Make
sure you set the correct AM/PM time. The AM and PM indicators appear to the left of the
display.
3. Press the
Time Set Button
to confirm the time. The year will flash. Press the
–
or
+ Buttons
to adjust to the current year.
4. Press the
Time Set Button
to confirm the year. The month will flash. Press the
–
or
+ Buttons
to adjust to the current month.
5. Press the
Time Set Button
to confirm the month. The date will flash. Press the
–
or
+ Buttons
to adjust to the current date.
6. Press the
Time Set Button
to confirm the date and exit clock setting mode. 2 beeps will
confirm clock setting is complete.
TIP
: To toggle the clock display between standard 12 hour time and 24 hour (“military”) time
display, press the
Alarm 1 Button
or
Alarm 2 Button
while the display is flashing during
clock setting.
Setting and Using the Alarms
This unit features dual alarms which can be set to different times and alarm sources. Each is set
in the same way. Instructions are given as “Alarm Button”; use
Alarm 1 Button
or
Alarm 2 Button
to set respective alarms.
Note
: Each step must be completed while display is flashing or setting will time-out with any
changes saved.
Using the
iBT297
