P11
10
Snooze/Display Dimmer Bar
1. To program Snooze, touch the
Snooze/Display Dimmer Bar
located at the top rear of the
cabinet for 2 seconds during normal operation (when no alarm is sounding).
2. Press the
–
or
+ Buttons
to select the desired snooze time (between 01 and 29 minutes).
3. Touch the
Snooze/Display Dimmer Bar
to confirm Snooze setting. 2 beeps will sound.
• While the alarm is sounding, touch the
Snooze/Display Dimmer Bar
to temporarily silence
the alarm for the set duration (9 minutes is the default). Snooze can be used several times
during the one hour alarm cycle.
• To adjust the brightness of the display, touch the
Snooze/Display Dimmer Bar
during normal
operation (when no alarm is sounding) to cycle through the brightness display settings,
including OFF.
Sleep Mode
This unit allows you to sleep to the current sound source for a set time before turning the unit off.
(Sleep mode can be customized using the free iHome Enhance app.)
1. To set Sleep time, press and release the
Sleep Button
as needed to cycle to the desired sleep
duration:120, 90, 60, 30 or 15 minutes or OFF (turns the unit off). The sleep icon will appear
on the display.
2. Press the
or
Buttons
to adjust the sleep volume on the unit. Note that the sleep volume
setting is stored separately from other volume settings.
When Sleep mode is active, press and release the
Sleep Button
to display remaining sleep time.
FM Radio
Extend the FM antenna for best reception.
1. Press and release the
Mode Button
as needed until the FM indicator icon and current FM
radio frequency appear on the display.
2. Press the
–
or
+ Buttons
to tune the radio to the desired station (hold to scan for the next
clear station).
3. Press the or
Buttons
to adjust the volume on the unit.
4. When you are through listening, press the
Power Button
to turn the unit off.
Using the
iBT297
