9
P10
Setting and Using the Alarms
(continued)
1.
Press and hold
the
Alarm Button
for 2 seconds until the alarm time display and alarm icon flash. A beep
sounds.
2. Press the
–
or
+ Buttons
to adjust the alarm time to the desired time (hold for rapid setting).
Make sure you set the correct AM/PM alarm time. The AM and PM indicators appear to the left of the display.
3. Press the
Alarm Button
to confirm the alarm time setting. The alarm schedule will flash:
7 (every day), 5 (weekdays) or 2 (weekend only). Press the
–
or
+ Buttons
to select the desired alarm
schedule.
4. Press the
Alarm Button
to confirm the alarm schedule. The wake-to source will flash.
5.
Press the
–
or
+ Buttons
to select the desired wake-to alarm source: Bluetooth, FM radio, Tone or Light
Only (no alarm sound).
Wake to Bluetooth
: You will wake to the currently linked Bluetooth device. If no device is detected, the
alarm will default to the last tone selected.
Wake to FM radio
: Press the
Alarm Button
to confirm. Press the
Presets Button
to select an FM preset
to wake to, or press the
–
or
+ Buttons
to tune in a desired wake to station.
Wake to Tone
: Press the
Alarm Button
to confirm. Press the
–
or
+ Buttons
to select the desired tone to
wake to (Tone 1 -Tone 4).
Wake to Light Only
: Press the
A
larm Button
to confirm. Select this mode to wake to silent light only
alarm. (You will then skip volume setting and advance to step 9
Wake to Light
setting.)
6. Press the
Alarm Button
to confirm wake-to source. The alarm volume will flash (unless Wake to Light is
set wake to choice, then volume setting is skipped and you are done).
7. Press the
–
or
+ Buttons
to adjust the alarm volume.
8. Press the
Alarm Button
to confirm alarm volume. The current Wake to Light mode will flash.
9. Press the
–
or
+ Buttons
to select the desired light mode to wake to (Dawn, Slow Fade, Fast, One Color,
Pulse, Sky Gradient, Lamp or Off).
10. Press the
Alarm Button
to confirm the alarm settings and exit alarm setting mode. 2 beeps will confirm
alarm setting is complete. The alarm icon will remain on the display, indicating the alarm is armed.
11. To turn off a sounding alarm and reset it to come on the next day at the same time, press the
Power
Button
or the associated alarm button (
Alarm 1 Button
or
Alarm 2 Button
) to reset alarm.
Previewing the Alarm and Turning the Alarm On/Off
Press and release the desired
Alarm Button
as needed to preview the alarm and to toggle the alarm ON
(indicated by the alarm icon) or OFF (no alarm icon).
Using the
iBT297
