7
Setting and Using the Alarm (Continued)
3. Press and release the
Alarm
Button again to confirm the alarm schedule. The wake to icon and the current alarm source
will flash. Press the
–
or
+
Button as needed to select to set the alarm wake-to source: BT, FM radio or Tone.
To
Wake to Bluetooth:
You will wake to the currently linked Bluetooth device. If no device is detected, the alarm will
default to buzzer.
To Wake to FM radio:
The default wake to source is the current FM radio station. Press the
Alarm
Button to confirm
Radio as alarm source, then press and release the
–
or
+
Button to set a different station (press and hold to scan to the
next clear station).
To wake to a preset station
, press the
Play/Pause/Preset
Button to cycle to the desired preset (see
page 8 for details on setting presets).
To wake to Tone
: Press the
Alarm
Button to confirm Tone as alarm source, then press and release the
–
or
+
Button as
needed to preview and cycle through the four tones.
4. Press and release the
Alarm
Button again, then press and release the
–
or
+
Button to adjust the alarm volume. Note that
alarm volume is stored separately from standard volume.
5. Press and release the
Alarm
Button again, then press and release the
–
or
+
Button to set the color LED wake cycle:
Dawn (amber fade leading up to alarm time), Flash (flashing red while alarm sounds), Glow (glowing color sequence
while alarm sounds) or None (no wakeup LED effect).
6. Press and release the
Alarm
Button again (or no button within 10 seconds) to exit the alarm setting mode. 2 beeps will
confirm alarm setting is complete. The alarm will be armed once set and the corresponding alarm icon will light up. The
lower part of the display will show the earliest set alarm time.
Using the
iBT290
