OPERATION
IC75-2 ENG
3-17
CA-C301150
CAUTION OF TRAVEL ON A STEEP SLOPE
•
Do not travel on slopes over 20
°
in order to
avoid turnover.
•
On steep slopes over 9
°
, travel the machine at
low travel speed and middle or lower engine
speed.
•
Never change the travel direction on steep
slopes or cross such slopes. Such operation
may cause turnover or slip. Move down to a flat
ground once and make a detour. Be sure to
drive safely.
•
Overruns tend to occur when traveling downhill
in the manual mode.
If an overrun occurs, perform overrun
avoidance operation immediately.
Cautions
Travel in the proper postures shown below.
•
Drive the machine with the cabin upper side of a slope
when the vessel is empty. This posture ensures stable
driving, since the center of gravity is located on the
cabin side.
•
Drive the machine with the vessel upper side of a slope
when the vessel is full. This posture ensures stable
driving, since the center of gravity is located on the
vessel side.
•
When driving over an obstacle, reduce the speed and
drive safely with care not to turn over.
•
Do not accelerate or decelerate the speed or stop
suddenly.
Never change the travel direction on
or cross a slope.
Make a detour on
a flat ground.
Downhill
Uphill
Operator seat
Traveling on slope with an
unloaded machine
Downhill
Uphill
Traveling on slope with a
loaded machine.
Vessel
(Wrong)