MAINTENANCE
IC75-2 ENG
4-31
CA-C401250
ELECTRIC SYSTEM
Change the Fuses
NOTICE
•
Before changing fuses, be sure to always set
the engine key switch at the "OFF" position and
disconnect the battery terminals.
•
Do not use wires, silver foils, etc. instead of
fuses.
If such materials are used, the wires may
overheat and burn, resulting in a fire.
1. Set the engine key switch to the OFF position.
2. Take off the fuse cover.
3. Replace the blown fuse with a new fuse of the same
capacity using the fuse pull-out holder set in the fuse
box.
Code Capacity (A)
Circuit name
F1
15 A
Engine start
F2
10 A
SCR relay
F3
10 A
Engine service tool
F4
15 A
DEF/S/M relay, DEF heater relay
F5
10 A
Back monitor, radio
F6
20 A
Solenoids, display, joystick
F7
20 A
Air conditioner
F8
20 A
Lights, direction indicator lamps
F9
20 A
Horn, cabin
F10
30 A
Working light
F11
30 A
Backup
Change the Fusible Link
If power is not turned on even though the engine key
switch is set to the ON position, the fusible link between
the battery and the engine key switch circuit may have
blown out. Detach and check the fusible link. Replace it
with a new fusible link, if it has blown out.
The fusible link is mounted in the battery cover.
Fusible link 2P
(60 A + 140 A)
Fuse box