IHI IC120, Руководство по эксплуатации

Страница: 93 / 103

MAINTENANCE
IC120 ENG 4-31
ELECTRIC SYSTEM
Change the fuses
NOTICE

Be sure to set the engine key switch to the OFF
position before replacing the fuses.

Do not use wires, silver foils, etc. instead of
fuses.
If such materials are used, the wires may
overheat and burn, resulting in a fire.
1. Set the engine key switch to the OFF position.
2. Take off the fuse cover.
3. Replace the blown fuse with a new fuse of the same
capacity using the fuse pull-out holder set in the fuse
box.
Code Capacity (A) Circuit name
F1 5A Radio
F2 5A Monitor
F3 10A
Back buzzer, lock lever, parking &
travel speed selector switch
F4 10A Dump
F5 20A Head light & blinkers
F6 20A Horn, cabin & air conditioner
F7 20A Reserve
F8 5A Engine 1
F9 5A Engine 2 (lamp & buzzer)
F10 30A Engine 3
F11 10A Engine 4 (service connector)
Change the fusible link
If power is not turned on even though the engine key
switch is set to the ON position, the fusible link between
the battery and the engine key switch circuit may have
blown out. Detach and check the fusible link. Replace it
with a new fusible link, if it has blown out.
The fusible link is mounted in the battery cover.
Fuse box
Fuse pull-out holder
Fusible link 2P
(60A+140A)