IHI IC120, Руководство по эксплуатации

Страница: 92 / 103

MAINTENANCE
IC120 ENG 4-30
AIR INTAKE AND EXHAUST SYSTEM
Clean and replace air cleaner element
If the air cleaner clogging lamp on the instrument panel is
lit, the element is clogged.
Clean or replace the element.
1. Disconnect the housing clip (2) of the pre-cleaner (1).
Detach the pre-cleaner from the housing (6).
2. Take out the pre-cleaner sub-assembly (3), primary
element (4) and secondary element (5).
3. Remove dirt and foreign matters from the primary
element and secondary element.
Do not clean the elements with strong air blow.
Otherwise, the filter performance may be deteriorated.
4. Replace the elements with new ones, if they are
contaminated excessively or damaged.
5. Clean the inside of the pre-cleaner and pre-cleaner
sub-assembly.
6. Clean the inside of the housing. Re-assemble the
parts in the reverse order to disassembly.
CAUTION
• Be sure to stop the engine before cleaning or changing the air cleaner. If it is cleaned
or changed while the engine is running, dust is sucked in, causing engine damages.
• Remove the secondary element with great care not to allow dust or foreign matters
from entering the air cleaner pipe.
1
2
3
4
5
6