iGuard IP-101S, Руководство пользователя

Страница: 43 / 84

Appendix A: Router Configuration
Choose this if you are installing the iGuard on a network with a DHCP server
“Use the following IP Address”
Enter an appropriate internal IP Address, Subnet Mask and Gateway for iGuard if
have a static IP to assign to the iGuard
“Obtain an IP address by Bootp”
Allow iGuard to obtain an IP address using Bootp protocol.
6. Click “Next >” to proceed to xDSL/Cable modem setup.
This section has to be configured to allow iGuard to access the Internet through an
xDSL service provider.
Select “Enable PPPoE connection” and enter your account and password details
as provided by your internet service provider (“ISP”).
Otherwise, leave it at the default “Disable PPPoE connection”
7. Click “Next >” to change your administrator account and password information.
42