iGuard IP-101S, Руководство пользователя

Страница: 23 / 84

Chapter 4: iGuard Web Manager
“Permission”
Determine the permission level to one of “Administrator”, “Operator”, “Viewer” or
“No Access”
Administrator: This permission allows the user full access including
write permission to all the sections.
Operator: This permission level allows the user access to iGuard
menus, but without the permission to amend them. The
administrator can also set “Permit Hours” here for seeing
camera.
Viewer: This permission level allows the user to access iGuard at
specific time as set in “Permit Hours” for seeing camera.
The user does not have write permission and only
access the “Web Cam” and “Information” section.
No Access: This is to revoke either of the above two permission
levels given to a user. And make the user account
disable.
“IP Filter”
Visitor can only login from the IP address specified here for security
consideration. You can restrict a user access only from 192.168.1.0/24 by
setting up “192.168.1.*”. Otherwise, leave it as “*.*.*.*” to allow the user to login
from any place.
Fig.18. iGuard User Account Settings
“Max FPS”
This allows the administrator to determine the frames per second (“FPS”) allocated to
each type of account. By limiting the FPS, the administrator can manage the limited
bandwidth available. The administrator can set a figure between 1 to 20 and
unlimited FPS.
“Permit Hours”
When the Permission level is set to either “Operator” or “Viewer”, the
Administrator can configure and determine the time to which either permission
level can access the camera.
Click “Configure” to bring up the following window. You can set up to 4 different
Permit Hours (in 24hr format). Click “Apply” to save and “Close” to exit.
22