IGS Speed Rider 3 Скачать руководство пользователя страница 25

Страница: 25 / 87

Machine Installation

2.5 Setting the group number and ID of the cabinets

A. Setting the group number and ID of the cabinets

In order to launch a multi-player game (a maximum of 4 cabinets is allowed), you must

assign the cabinets into the same group but different ID. If four cabinets are connected,

then appoint their ID as 1P, 2P, 3P, and 4P.

❶

Under the standby mode, open the coin box, and press the

[TEST]

button to enter

[Operator Settings]

❷

Enter

[System Settings] > [Connection Settings]

❸

Assign the cabinets into the same group but different ID.

•

Example of connecting 2 cabinets (viewed from the front of the cabinet):

Cabinet(L)

Cabinet(R)

Please setup the connection here.

•

Example of connecting 4 cabinets (viewed from the front of the cabinet):

Cabinet(L)

Cabinet(R)

Please setup the connection here.

Setting the group number and ID of the cabinets

Содержание Speed Rider 3
























































































Результаты поиска

Содержание Speed Rider 3

Отзывы:

Бренды по названию

Популярные бренды

IGS Speed Rider 3, Руководство пользователя

Результаты поиска

Содержание Speed Rider 3

Отзывы:

Бренды по названию

Популярные бренды