– 4 –
Quick Start Guide
Note
:
Connecting the Ethernet cable from the AP to the injector module powers
on the unit.
5. Verify AP Operation
Verify basic AP operation by checking the system LEDs.
The power LED should be on green, the ETH0 port LED on/blinking green, and the
2.4GHz/5GHz wireless LED on/blinking green (2.4 GHz) or blue (5 GHz).
Connect the Ethernet cable from the AP to
the “POE” port on the power injector.
Connect Ethernet cable from the “LAN” port
on the power injector to a LAN switch.
Connect the power cord to a nearby AC
power source (100-240 VAC, 50/60 Hz).
1
2
3
3
2
1
2.4GHz/5GHz signal strength
LEDs.
2.4GHz/5GHz link/activity LED.
ETH1 port link/activity LED.
ETH0 (PoE) port link/activity LED.
Power LED.
1
2
3
4
5
5
4
3
2
1
