Ignite B6A800101, Руководство по эксплуатации и техническому обслуживанию

Страница: 13 / 44

11
DAILY INSPECTION
Inspecting The Attachment Mounting Frame
Figure 4
C208294a
Inspect the attachment wedge mounts (Item 1), mounting
flange (Item 2) [Figure 4], and all welds on the attachment
for wear and damage each time the attachment is
removed from the machine.
Frequently inspect the sweeper to ensure that all
components are secure, that all bolts and nuts are
thoroughly tightened, and that loose materials are not
wrapped around the bristles.
Inspecting The Machine Quick Coupler
WARNING
CRUSHING HAZARD
Failure to secure attachment coupler wedges can
allow attachment to come off and cause serious
injury or death.
Both wedges must extend through the holes in the
attachment mounting frame. Levers must be fully
down and locked.
◂
W-2715-EF
Figure 5
NA3448a
• Lower down the quick coupler levers until they are
fully engaged in the locked position [Figure 5]
(wedges fully extended through the attachment
mounting frame holes).
The levers and wedges must move freely [Figure 5].
Figure 6
NA3450A
The wedges must extend through the holes in the
attachment mounting frame, securely fastening the
attachment to the machine quick coupler [Figure 6].
If the wedge does not contact the lower edge of the
hole, the attachment will be loose and can come off
the quick coupler.
OPERATING INSTRUCTIONS