
-7-
www.igmtools.com
Operating instructions EN
6.2 Control panel features
8.2 Greasing
- The wheels and chains should be greased every 200
hours or 30 days using a grease gun, see section 2, the
location of grease on the displayed label (pic.20).
- Gears and chains: grease regularly.
- Recommended greases: (Shell – Alvania Grease
R2, SHELL GADUS S2 V220 2, MOBILUX EP 2; FUCHS
RENOLIT EP 2; BP ENERGREASE MM-EP 2
and other)
1.
Vypínač
s nastavení
m rychlosti
3. Tlačítko směru podávání
2.
Tlačítko nastavení
4. Tlačítko směru podávání
1
3
2
4
pic.16
1
Switch
and feed
speed
Speed in the range of 2-22 m/min
Press to turn the feed on and off
2
Settings
button
Press to set up the desired feed
speed
3
Feed
direction
button
Change of feed direction during
work: press the direction button
twice. The opposite direction will
run at the lowest speed. Press the
on/off switch twice for the original
setting.
4
7. OPERATING THE MACHINE
After switching the machine on, let the feeder reach
its full speed before feeding any material.
8. MAINTENANCE AND CONTROL
8.1 Replacing rollers
- You can choose out of two types of rollers:
Ø120 x 60 mm (141-R12060) and
Ø120 x 25 mm (141-R12025).
- The outfeed roller can be removed when working
with larger routers (pic.17).
- The infeed roller can be removed to avoid contact of
the saw blade with the feeder (pic.18).
- Use various roller combinations for different
conditions and operations.
pic
.17
feed dir
ection
pic
.18
feed dir
ection
Sada kol
Jedno kolo
pic
.19
Obr. 24
pic
.20
One roller
Set of rollers