
-
4
-
www.igmtools.com
Operating instructions EN
4. SPECIFICATIONS OF THE MACHINE
4.1 Machine description
1
2
3
5
6
7
8
9
10
11
12
14
13
15
17
16
4
pic.1
Never leave the machine unattended. Always switch
the machine off when leaving the workspace.
Watch your fingers and other body parts when
working. Never walk away from a machine without
protective guards.
Do not place anything on the machine.
Electrical connections malfunctions can be repaired
by an electrician only. Damaged electric cord must be
replaced immediately.
Any adjustments and maintenance may be carried out
when the machine is disconnected from the power
source.
3.3 Risks
Risks may arise even during proper and prescribed use
of the machine.
The danger of a workpiece flying off. Beware of noise
and dust.
Wear eye, ear and dust protection.
Use a suitable dust extraction device! Watch out for
damaged electrical cords.
3.4 Important notice
Only use the feeder in an appropriate environment.
Keep your workspace well ventilated and lighted,
avoid wet or damp environments.
Only operate the machines under temperatures
ranging from +5°to +40°C. Humidity from 30% to 95%.
3.5 Safety rules
The tool must reach working speed before feeding.
Do not overload the machine by feeding material too
quickly.
ALWAYS keep your hands away from rotating parts.
Provide additional support and stability for larger
workpieces.
Always switch off the feeder first, only then switch off
the machine that is being fed material.
Always disconnect the power cord before any repairs
or adjustments.
1 base
2 locking lever (turning)
3 height-adjustable arm 4 locking lever (height
adjustment)
5 stand
6 height control (turning alters height) 7 locking lever
(protrusion)
8 feeder arm
9 screws (positioning joint) 10 locking lever (turning)
11 locking lever (angle of the feeder)
12 angle locking pin 13 control display
14 motor
15 control wheel of arm protrusion (turning moves
the arm)
16 feeder grip
17 roller
4.2 Technical data
Type
DC30
DC40
Motor power (400V)
500W
500W
Arm reach
460mm
460mm
Max. workpiece height
250mm
250mm
No. of rollers
3
4
Size of rollers
120x60mm 120x60mm
Feed speed
2-22m/min 2-22m/min
Weight with stand
53kg
56kg
4.3 The package includes
feeder
feeder stand arm
quick adjustment joint
plan for base drilling 1:1 manual