en
12
User manual BASIA M
www.igloo.pl
Fig.1 Construction of the device
2.3. Technical data
Table 1 Technical data
Type of
the device
“KINGA 2”
Rated
voltage
[V/Hz]
Rated cur
-
rent [A]
Rated ligh
-
ting power
[W]
Electric
energy
con-
sumption
[kWh/24h]
Cooled
space [m2]
Usable volu
-
me [dm3]
Num
-
ber of
baskets
[items]
Weight
of the
device
[kg]
1.4 W
230/50
4
30 *
12,8
0,9
240
4
200
1.7 W
230/50
6,4
36 *
20,5
1,2
300
5
220
2.1 W
230/50
7,4
58 *
23,9
1,4
360
6
250
2.5 W
230/50
7,3
60 *
23,4
1,6
400
8
270
1 – Handout shelf on the glass
2 – Bent and lifted front glass
3 – Maximal loading line (sticker on the glass side!)
4 – Front screen (made of composite glass)
5 – Front fender beam
6 – Glass shelf for the customer
7 – Illuminated front panel
8 – Basis of the device
9 – Basket
10 – Working top
11 – Plexi night screens
12 – Aluminium lamp with illumination
13 – Data plate
14 – ABS sides
15 – Wooden platform mounted for transportation
16 – Feet used for levelling the device
17 – Wind frame (DO NOT BLOCK VENTILATION
HOLES!!!)
18 – Control panel (thermostat, switches)
* In case of devices with illuminated front panel the rated lighting power is two times greater than the one stated in the
table!
3. PREPARING THE DEVICE FOR EXPLOITATION
3.1. Requirements concerning the place of installation
• Verify whether the cross-section of feeding conduits is proper for the power consumption of the installed device
• It is forbidden to connect the device by means of extension cords or dividers
• The device should be connected to the separate, properly made electric circuit with plug-in socket with protecting pin
(according to PBUE /Regulations concerning Electric Equipment Construction/)
The device may be actuated solely after confirmation of the fire protection efficiency with results of measu
-
res performed according to binding regulations!
10
12
1
3
2
11
4
13
14
15
16
8
5
6
7
9
18
17
