Igloo ARUBA, Руководство пользователя

Страница: 16 / 40

en
16
User manual ARUBA, ARUBA 2 www.igloo.pl
When using the display cabinet, as well as during maintenance works, pay attention not to destroy the
temperature sensor in the evaporator screen!
It is recommended to make a break in the exploitation of the device once a month in order to clean its interior, naturally
defrost the evaporator, clean the condenser and verify the condition of door seals.
Do not use mechanical agents in order to fasten the defrosting process!
It is essential to keep the condenser of the device clean. Dirt may
hinder the heat exchange, causing mainly increase in electric energy
consumption and may cause damage of aggregate compressor.
In order to clean the condenser it is necessary to unscrew the sheet
metal screws and pull the wind brace out. Clean condenser lamellas
with help of soft brush or paintbrush. If the condenser is extremely dirty
(blocked lamellas) it is indicated to use vacuum cleaner or compressed
nitrogen to suck / blow the dirt from between lamellas.
The producer shall not be held responsible for damages of the condenser aggregate resulting from non-
observance of condenser cleanliness!
5. MAINTENANCE
5.1. Cleaning and maintenance
All maintenance services need to be performed after disconnecting the device from power supply!
Protect electric installation against any damage or water spillage
Do not use water stream to clean the device, only a wet cloth
Do not use any sharp objects to remove fi lth!
Fig.10 Changing the fl uorescent lamp
1 – Night roller
2 – Fluorescent lamp
3 – Upper shelf (cover)
4 – Starting switch of the
fl uorescent lamp
5 - Casing of fl uorescent lamp and starting switch
6 – Base pro fi le (PVC)
7 – Fluorescent lamp handle
8 – Transparent casing of
fl uorescent lamp
During maintenance services it is necessary to
pay attention not to damage the data place of
the device Fig.11 (p.18), which contains signi
fi -
cant information for servicing organs and waste
removal companies.
Fig.9 Cleaning the condenser
Elements of device can corrode when improper used and maintenance. To avoid that please
follow the rules:
• Do not allow contact of the surface of the device with substances containing chlorine and / or baking
soda in different varieties, which destroy the protective layer and components of the device (also
includes various stainless steel)
1 2 3
4
5
2
6
7
8