REFRIGERATION LTD
6
www.igloorefrigeration.com
|
Ice Cream/ Gelato
Figure 4 Leveling legs
A – Screw the feet in the nuts welded to
the frame of the unit
3.2. Unit Location
Remove cardboard angles and protective foil.
Install the unit on a strong and level surface.
To ensure proper operation the unit must be leveled from front to back and left to right.
Unit may malfunction if improperly leveled.
Be sure there is sufficient ventilation around the entire unit
Select a location a way from heat and moisture generating equipment.
Avoid installation in a high ambient or humid location.
High ambient temperatures will cause the compressor to overwork.
Humidity may cause rust, condensation around glass or stainless steel and decrease the efficiency of the
unit.
3.3. Connection and start-up
Unpack the unit.
Place the unit on an even and hard base. Then level the unit with the levelling legs.
Remove the protection foil from the elements of the unit (e.g. from the inside of the unit, display shelves,
front bumper).
To securely transport the equipment, the unit may be shipped partially disassembled. If the user received
the unit partially disassembled, perform the following operations:
1.
Place cross-bars under stainless steel containers (Figure 5/4)
2.
Place containers according to Figure 2 or Figure 3
3.
Slide in glass sides according to Figure 5/2
The equipment should be cleaned right after unpacking and before turning it on. The unit should be cleaned
with warm water not exceeding 40°C with a neutral detergent. For washing and cleaning the equipment, it
is prohibited to use products containing chlorine and sodium varieties, which destroy the protective layer
and components of the equipment! Any residue of adhesives or silicone on metal elements should be
removed only with extraction naphtha (not applicable to items made of plastic). Do not use other organic
solvents.
When cleaning the unit, do not use water jet. The unit should be cleaned with a
moist cloth.
■
NEMA Plugs
IGLOO refrigeration uses this type of plug. If you
do not have the right outlet, have a certified
electrician install the correct power source.
115/60/1
NEMA-5-20R
