REFRIGERATION LTD
Ice Cream/ Gelato Cases| www.igloorefrigeration.com
13
It is essential to keep the condenser clean. Dirt may hinder the heat exchange, causing increase in electricity
consumption and may cause damage to the compressor. In order to clean the condenser it is necessary to unscrew
the sheet metal screws and pull the wind brace out of catch by lifting it up. Clean condenser lamellas with help of
soft brush or paint brush. If the condenser is extremely dirty (blocking of lamellas), use vacuum cleaner or
compressed nitrogen to remove dirt from between lamellas.
The seller shall not be held responsible for condenser damages in the case of non-
observance of condenser cleaning instructions
Elements of the equipment can corrode as result of improper use and maintenance.
To prevent damage: Do not allow contact of the with substances containing chlorine
and/ or baking soda in different varieties, which destroy the protective layer and
components of the equipment (also includes various stainless steel)
6. SERVICE
6.1. Faults identification and repair
In case of any difficulties during actuation of the equipment or during its operation, please return to the chapters in
this manual, which explain the performed operation. This aims to ensure the equipment is properly operated. If you
still experience difficulties, the following might help you solve the problem.
The equipment is not working... – Make sure that:
• The equipment is connected to the power supply.
• Voltage and frequency in the network are compliant with those recommended by the manufacturer, 115V/60Hz
or 115V/220V/60Hz.
• The main switch is turned on.
• Thermostat is turned on.
The equipment is operating, but the light is off... – Make sure that:
Figure 9 Cleaning the condenser
