HDMI
WAN
LAN8
LAN6
LAN4
LAN2
LAN7
LAN5
LAN3
LAN3
VGA
48V
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK
DO NOT OPEN COVERS. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
WARNING : TO PREVENT FIRE OR SHOCK HAZARD. DO NOT
EXPOSE UNITS NOT SPECIFICALLY DESIGNED
FOR OUTDOOR USE TO RAIN OR MOISTURE.
AUDIO OUT
1
2
3
4
5
6
2.2 Connection Diagram
OR
Internet
1
2
3
4
5
6
Connect the mouse to the USB Port on the front or back panel of the NVR.
Connect cameras to the recorder using the included 60ft/18.3m Ethernet cables.
Depending on the monitor port, connect the HDMI or VGA cable from your monitor to the HDMI or
VGA Port on the rear panel.
Use the included power adapter to connect the recorder to a nearby outlet. Turn the recorder on
using the power switch on the back panel.
Connect one end of the Ethernet cable into your router’s LAN port, and the other end of the cable to
the Ethernet port on the rear panel.
Note:
Each Homeguard camera is supplied with a mounting kit for attaching it to a wall. Before you
affix the camera in position, please ensure the cable is of adequate length to reach the NVR.
Above diagram is for reference only. The practical connection may be different depending on
the NVR you purchased.
Connect cameras to a PoE switch or router on your network (not included).
Note:
Connecting cameras to a router, or a network switch without PoE, requires a power adapter for
each camera.
8
