11
Horizontal Oscillation Function
1. When the fan is on, press the
button to enter the horizontal oscillation
function. The default oscillation angle is 30° which will appear on the control
panel display. Press the
button again to change the angle to 90°, again
for 180° and again for 360°. Press a further time to turn off the horizontal
oscillation.
2. When the horizontal oscillation function is on and the desired angle has been
selected, the corresponding angle will be displayed on the control panel and
the fan will oscillate at this angle continuously until the angle is changed or
the horizontal oscillation function is turned off.
Note: When turning on the fan from stand by the Horizontal Oscillation
function will resume to the same setting as previously before turning to stand by.
Note: If the horizontal oscillation is not centred due to sudden power failure
or abnormal operation, please turn on the horizontal oscillation function after
power on, and then turn off the power to return horizontal oscillation to the
centre point.
Control Panel Display Function
When the fan is turned on, press the control panel display button to turn
off the control panel display. Press again to turn the display back on. When the
control panel display is turned off, the function settings do not change. To change
any functions, press the relevant buttons and the display will turn back on. Once
the desired function has been set, press the control panel display button again
to turn the display off.
OTHER FUNCTIONS
Power Memory Function:
If it is not the first time the fan has been turned on, when you press the Power
(On/Off) button in the standby state the fan will turn on and revert to the
settings last used before it was switched off. Please note, this does not include
the timer function.
Please Note: The memory function will not work and resume to last setting if
turned off at the mains socket or the fan is unplugged.
