![background image](http://html1.mh-extra.com/html/igenix/ig350r/ig350r_user-manual_3944434014.webp)
14
Door Seal
Check the door seal regularly to make sure there are no debris. Use a clean,
damp soft cloth to wipe the door seal and in between the creases, avoid
damaging the door seal as this will affect the performance of your appliance.
Going Away
If you are going away and do not want to leave the appliance left on, switch off at
the socket and remove the plug from the mains sockets ensuring not to pull the
cord.
Remove any food and follow the cleaning instructions in this section.
Note: Leave the door ajar as this will prevent odours accumulating in the fridge
and will allow the unit to dry completely.
Power Cut
In the event of a power cut keep the appliance door closed to maintain the
temperature inside.
Operating Sounds
The cooling gas which circulates in the cooling circuit may make a slight noise
(bubbling sound) even when the compressor is not running. Do not worry this is
quite normal.
If these sounds are different check that:
• The appliance is well levelled
• Nothing is touching the rear.
• The stuffs on the appliance are vibrating.
Changing the Light
The light is an energy efficient, long life LED. Therefore it should not need
replacing throughout the life of the product, however if it does, it is advised to
contact a qualified technician.
1. Remove the light cover
2. Loosen the thermostat knob and fastening screw, and remove the thermostat
box assembly
3. Remove the connector
4. Remove the light