![background image](http://html1.mh-extra.com/html/igenix/ig350r/ig350r_user-manual_3944434011.webp)
11
OPERATING INSTRUCTIONS
• This appliance must be left to stand in an upright position for at least 5 hours
before being switched on for the first time.
• Before placing food in the appliance turn on and wait 24 hours, this is to
make sure it is working correctly and also to allow for the optimal internal
temperature to be reached.
• The interior of the appliance needs to be cleaned prior to use by wiping with
a soft cloth and using warm water. Wipe the appliance completely dry before
replacing any shelves or salad drawers.
• Once dry, plug the appliance into the mains socket.
• Avoid opening the door for long periods or unnecessarily.
• To maintain adequate air circulation, do not over fill the appliance.
• Allow hot or warm foods to cool to room temperature before storing in the
appliance.
Using the Appliance
• When operating the appliance for the first time, run it without loading any
food until it automatically stops at the desired temperature. Usually this takes
2 or 3 hours, then set the dial at the setting you desire and add the food.
• The temperature can be adjusted by turning the thermostatic dial. A medium
setting is the most suitable for general operation.
• Defrost the freezer compartment whenever the layer of frost on the surface
of the evaporator reaches 3-4mm.
Noises Inside the Appliance
You may notice that the unit makes some unusual noises. Most of these are
perfectly normal, but you should be aware of them.
These noises are caused by the circulation of the refrigerant liquid in the cooling
system. It has become more pronounced since the introduction of CFC free
gases. This is not a fault and will not affect the performance of your unit. This is
the compressor motor working, as it pumps the refrigerant around the system.