iGen iGen-LE, Руководство пользователя

Страница: 15 / 36

15
Adjustable Features
1. Eyepiece (technically referred to as the diopter focal lens in front of the microdisplay)
The iGenLE has two different focus adjustments. The eyepiece lens adjusts to focus the
display to your individual eyesight. The objective lens focuses on objects in the distance.
To adjust the eyepiece, do the following:
a. Push up on the triple action switch located on the bottom.
b. The menu will appear. Use this menu as a target to focus the eyepiece.
c. Rotate the eyepiece rubber cup until the menu letters are sharp and in focus.
If the menu disappears, push up again to see the menu again.
d. Use the menu as a focusing target. This adjustment focuses your individual
eyesight on to the display screen.
e. After the eyepiece focus is adjusted, do not change this adjustment, even if
the image is out of focus. After you set the eyepiece adjustment, use the
objective (front) lens to focus on objects in the distance.
2. Objective Lens (large lens in metal housing on front of device)
This lens must be manually rotated to bring objects into focus. As you aim at different
objects at different distances, you may need to rotate the lens to bring the objects into
focus. This operates just like a pair of binoculars.
22
Adjustable Features
Video Format (continued)
To record to an external device, remove the rubber plug on the left side of the device, and
connect with a composite video cable
(RCA cable). The recording device you use must
have a composite video input jack (yellow color). With the iGen powered on and focused,
no other iGen settings are necessary. If use of the eyepiece display is not required, extend
battery life by turning off the display with the “display on/off” function.
9. Date and Time (Control is located under the SYSTEM menu)
By adjusting the internal date and time, photos saved onto the memory card will be date-
stamped with the current date in the .jpg and .tif file attributes.
The date and time must be set on a new device; if the batteries are removed for more
than 15 minutes, the internal memory will be lost and will need to be re-set after batteries
are reinstalled.
If the device powers off automatically after a low battery warning, those same low voltage
batteries will still have sufficient capacity to power the internal memory and keep the time
and date current for a long time. So only remove drained batteries when you will
immediately replace them with new batteries.
When in the Date/Time menu:
Push Up the triple action switch to move from field to field.
Push the triple action switch Right or Left to change a value.
Choose Save to leave the menu and save date/time changes.
Choosing Exit will leave the menu without saving your changes.