iGen iGen-LE, Руководство пользователя

Страница: 14 / 36

14
Controls
Push up to activate the menu and program the iGen.
The programming function works as follows:
1. After menu activation, the menu will
time-out in ten seconds if you do not make
a selection.
2. To move through the menu selections, push the triple action switch left or
right.
3. To choose a menu selection for programming, push up on the triple action
switch.
You will choose the selection indicated by the arrow.
4. To program a setting, move the triple action switch left or right.
See the settings change.
5. To accept a setting after programming, push the triple action switch up.
6. When a setting is entered using the left/right control, the setting becomes active
immediately, but you must push the triple action switch up to permanently accept
the setting. If you do not accept a setting after 10 seconds, the menu will time-out
and the previous setting will return as the permanent setting.
23
Adjustable Features
10. Display Off
When using the iGen connected to an external recording device, and you do not
need to view the scene through the eyepiece, you may turn the display off. This will
greatly improve battery life.
To turn the display off, choose “Display”, then “On-Off”. When you toggle down to the
“Off” setting, the display will immediately turn off. After the display turns off, you must
then push the triple action switch up to save this setting. If you do not accept the off-
setting by pushing up after the display turns off, the display will turn back on after ten
seconds.
To turn the display back on, turn power off and then turn power back on with the
On/Off Button.