iGen iGen-LE, Руководство пользователя

Страница: 12 / 36

12
Controls
1. Power/IR Button
On top side, closest to your eye
• Power :
Press-and-hold to turn on.
Press-and-hold to turn off
• Infrared :
Toggling button activates one of three different modes:
IR AUTO: the infrared emitter will measure the amount of ambient available, and
emit a calculated amount of light to illuminate the scene as required. This
setting will conserve battery life and is usually the preferred setting if you have
decided that the environment is so dark that you cannot see well without its
assistance.
IR MAX: the infrared emitter will output the maximum amount of infrared light
possible for maximum illumination at all times. Constant use at this setting will
minimize battery life.
IR OFF: no infrared light is emitted
POWER / INFRARED
IMAGE
CAPTURE
25
Daytime Use
To use in daylight conditions, leave the lens cap attached and operate at low gain
settings.
Tripod Adaptor
The tripod fitting is located on the underside of the device, and fits to all standard tripod
mounts with a fitting size of 1/4 - 20.
Tripod mount is recommended for exposures of less than 10fps for image stabilization.