Igema EWLS, Инструкция по установке и эксплуатации

Страница: 20 / 36

20
Diagram:
| --- 1.
System Info ---
| | - 1.1. Probe state |
| | - 1.2. Relay state |
| | - 1.3. MU system A |
| | - 1.4. MU system B |
| --- 2. Supply ---
| |- 2.1. Input Pin 1 |
| |- 2.2. Input Pin 2 |
| |- 2.1. Output Pin 3 |
| --- 3. Version ---
| |- 3.1. Control |
| |- 3.2. Measurement |
| |- 3.3. Display |
| --- 4. Settings ---
| |- 4.1. Backlight |
| |- 4.2. Password |
| --- |-----After entering valid password------------------
| |- 4.3.
Relay setup |
| |- 4.4. LLW Alarm |
| |- 4.5. HHW Alarm |
The password is: 123; it unlocks programming points 4.3, 4.4 and 4.5 and
is only used to prevent unintentional system programming.
Menu description:
1.1 Probe state:
The state of the probes is displayed, “w” for water, “s”
for steam.
For illogical states, for example water over steam, the
submerged probe is displayed in capitals (e.g. “W”).
1.2 Probe state:
The switch state of the 9 outputs is displayed “0” for rest
position (NO) and “1” for activated.
1.3/1.4 MU System A/B: Temperature of the respective electronics of the
measuring unit.
2.1 Input Pin 1: Supply voltage 1 (theoretical 24 V)
2.2 Input Pin 2: Supply voltage 2 (theoretical 24 V)
2.3 Output Pin 3: Can-Bus
– voltage (theoretical 23.5 V)
3.1 Control: Version number CU
3.1 Measurement: Version number MU
3.1 Display: Version number DU
4.1 Backlight: Brightness setting of LCD display
4.2 Password:
Password “123”
Caution