A
SSEMBLY
D-09-B-62825-EN-00
Page / 17
7 Assembly
7.1 Version with flange
•
Observe the orientation of
the gauge .
•
Check sealing surfaces
for cleanliness
•
Assemble the flange
connection between the
gauge and the valve in
accordance with the
applicable standard
7.2 Version with welding sleeve
W
ARNING
Eye damage due to lack of personal protective equipment
Lack of eye protection during welding leads to eye damage in working and bystanders.
•
Secure the work area.
•
Wear a welding protective mask.
•
Observe the orientation of the
gauge.
•
Remove protection caps.
(Transportation lock)
•
Assembly only by using
welding process
111 (metal-arc welding with
covered electrode)
or
141 (inert-gas tungsten-arc
welding).
•
Check on an application-
specific basis whether a
subsequent heat treatment of
the weld seams is required.
