*Please make sure that both earphones are
switched off before putting them in the charging
case. If they are not paired or reset to defaults,
you need to pair 2 earphones manually as below
steps:
• Press and hold the multi-function key for 5
seconds of both earphones simultaneously,
release when the indicator lights turn red and
blue, and responds with a vice prompt:
“POWER ON”, it will then pair and connect
automatically.
• When paired successfully, the indicator lights
of one earphone will flash alternately in blue
and red, while blue indicator light of another
earphone will flash slowly.
5. S Earphone mode
If earphones are put into the charging case when
listening music, it will play by speaker
automatically and earphones will start charging
automatically.
6. Power off
a. TWS mode: Press and hold the multi-function
key on both earphone for 5 seconds. Release
when the red indicator light is on with a voice
prompt: “POWER OFF”.
