SL-014 v1.6 Page15
Document Ref: SL-014 v1.6
Special Status States
State
Warm up
Fault Communication
Fault Over Range
Fault Under Range
Fault Failed Self Test
Processor Voltage
Fault Failed Self Test
Flash Memory
Fault Failed Self Test
RAM
Alarm 1, 2, or 3 Active
Zero/Calibration
in Progress
Inhibit Controller
Output Test
Indication
On Screen Count Down ‘Blue’
Comms Error Displayed ‘Yellow’
Channel/Display Indication Yellow
Channel/Display Indication Yellow
On Screen Display Indication
Yellow
On Screen Display Indication
Yellow
On Screen Display Indication
Yellow
On-Screen Red
Alarm 1, 2, or 3 Active Display
Each Channel in Alarm
Calibration in Progress
On-Screen Blue
On-Screen Blue
State
Modbus State Available*
Fault Relay Normal
Alarm Relays Normal
Modbus State Available*
Fault Relay Active
Alarm Relays Normal
Modbus State Available*
Fault Relay Active
Alarm Relays Normal
Modbus State Available*
Fault Relay Active
Alarm Relays Normal
Modbus State Available*
Fault Relay Active
Alarm Relays Normal
Modbus State Available*
Fault Relay Active
Alarm Relays Normal
Modbus State Available*
Fault Relay Active
Alarm Relays Normal
Alarm Relay 1, 2, or 3 Active**
Modbus State Available*
Fault Relay Normal
Modbus State Available*
Fault Relay Normal
Alarm Relays Normal
Modbus State Available*
Fault Relay Normal
Alarm Relays Normal
Modbus State Available*
Fault Relay Normal
Alarm Relays Normal
* See Modbus information for available registers and options
** Alarm Relays can be setup via the controller software, see alarm options. Each channel on the
system will automatically have at the least an alarm level one. This is not optional
The following Pages indicate some of these special states and how they are displayed
