manualshive.com logo in svg

Ifor Williams Trailers HBX, Руководство пользователя, Страница: 28 / 42

Поделиться
Скачать
Ifor Williams Trailers HBX Скачать руководство пользователя страница 28

28

1

2

3.

  Whilst supporting the centre pole, 

remove the pin from the top taking  

care with the spring. 

4.

  Tilt pole towards the rear of the trailer  

to disengage the hook from the slot in 

the floor.

5.

 Lift pole up and out of the slot.

5.3.2  INSTALLING THE 

PARTITION CENTRE 

POLE 

1.

  Installation is the reverse of the removal 

procedure outlined in 3.3.5.1.

2.

   Hook centre partition pole into the slot  

in the floor at an angle.

3.

  Straighten pole to vertical, ensuring the 

pole engages with the channel in the roof.

4.

  Push pin with spring through the channel 

and centre pole.

5.

 Secure pin in place with the R-clip.

5.4  IN THE EVENT OF A 

HORSE BECOMING STUCK 

The breast/breeching bars can be removed 

from outside the trailer by removing the 

retaining bracket eye-bolts, first the lower 

one and then if necessary the top one. These 

eye-bolts can be undone by hand, or by using 

the supplied Ifor Williams Wheel Brace. Pull 

the eye-bolt towards you as you rotate it anti-

clockwise to release it. To use the wheel brace 

simply pass the handle through the eye bolt and 

turn (see diagram below). Being able to release 

the breast/breeching bars from outside of the 

trailer allows a distressed horse to be unloaded 

without endangering yourself by trying to 

unhook the breast/breeching bars from inside.

5.5  INSPECTION/

GROOMS DOOR 

The inspection door is to allow access to the 

horses without opening the ramp. It should 

be kept closed when not in use and whenever 

the trailer is being moved. 

Never leave the door open if you intend 

leaving a horse unattended, as the horse may 

attempt to exit the trailer though the open 

door and cause injury to itself.

Periodically check that the breast/breeching 

bar release fasteners turn freely.

1

2

Содержание HBX











































Отзывы:

Нет отзывов