Ifor Williams Trailers HBX, Руководство пользователя, Страница: 22 / 42

22
i. For each Ramp handle/latch, move the
safety spring so that the handle can rotate
and move the handle towards the outside
of the trailer a full 180 degrees so that the
handle is pointing directly upwards as per
the image below, thus unlatching the ramp.
ii. Keeping a firm hold and standing to one
side of the ramp, pull the handle to open
the ramp.
7. Continuing to stand to the side of the
ramp, lower the ramp down slowly.
4.1.3 CLOSING THE RAMP
1. Check that nothing is protruding to block
ramp closing.
2.
Standing to the side of the ramp, lift and
close the ramp. Try to avoid slamming
the ramp as this may disturb your horses.
3. Latch each side of the ramp in turn
reversing the opening procedure.
4. If the spring shown in the image below
isn’t present or appears damaged, then
do not tow the trailer until it has been
replaced.
5. Raise the prop stands if fitted.
4.1.4 OPENING
THE REAR
RAMP AS A SIDE
HINGING DOOR
CAUTION. If the trailer is facing up hill,
nose up, when opening the rear ramp door,
the ramp door may start to swing open as
soon as the catches and bolt are released.
1. Position the trailer on firm level
ground and apply the vehicle and
trailer handbrake.
2. Lower the rear prop stands
if fitted.
3. Before opening the
ramp door look inside for
anything leaning against
the ramp and remove if
possible.
4. Open top doors:
i. Pull down the spring-
loaded T-bar to release the
top door.
ii. Swing both doors all of
✓ ✓
✓
✓