Ifor Williams Trailers HBX, Руководство пользователя, Страница: 26 / 42

26
5.2 OPERATION
5.2.1 OPENING THE STALL
1.
Remove the linch pin from the Breast/
Breeching bar pin end. Note that the hook
end of the Breast/Breeching bar should
engage with the bracket on the partition
and the pin end of the Breast/Breeching
bar with the wall mounted bracket.
2. Lift up the Breast/Breeching bar at the pin
end to detach from the wall and move away
from the Breast/Breeching bar bracket so
that it can now be dropped down.
3. Lowering the Breast/Breeching bar at the
pin end which will allow the hook end in the
partition bracket to be removed.
4. Unhook the hook end of the Breast/
Breeching bar to completely release the
Breast/Breeching bar.
5. Put the Breast/Breeching bar out of the
way, pass to a helper or leave in the trailer
by hooking the hook end onto the bottom
loop on one of the brackets.
6. Repeat steps 1 – 5 on the other side of
the partition to fully remove both bars.
7. When the optional head partition is fitted
only. For the front partition unhook rubber
straps from front of head partition, this
partition is now able to rotate.
5.2.2 CLOSING THE
STALL
1. Hook the breast/breeching bar on to the
partition breast/breeching bar brackets.
2. Lift up the pin end over the wall mounted
breast/breeching bar bracket.