IFM TCC8 Series, Руководство по эксплуатации

Страница: 5 / 21

5
UK
The unit features an integrated diagnostic function and a calibration check function
(→ 5.4.1) � The diagnostic messages are provided via an analogue signal or a
switching signal or as a digital communication signal via the IO-Link interface�
The unit has an LED that indicates deviations from normal operation via a colour
change (→ 5.4.2) �
5 Function
• The unit has an IO-Link interface�
• The unit is designed for three-wire operation� The following output signals are
available:
OUT1 (2 options):
-diagnostic signal
-IO-Link signal for temperature measurement and diagnostics
OUT2:
-analogue signal for temperature measurement and diagnostics
5.1 IO-Link
This unit has an IO-Link communication interface which enables direct access to
process and diagnostic data� In addition it is possible to set the parameters of the
unit while it is in operation� Operation of the unit via the IO-Link interface requires
an IO-Link master�
With a PC, suitable IO-Link software and an IO-Link adapter cable communication
is possible while the system is not in operation�
The IODDs necessary for the configuration of the unit, detailed information about
process data structure, diagnostic information, parameter addresses and the
necessary information about the required IO-Link hardware and software can be
found at www�ifm�com�