11
UK
• A simulated calibration check warning (LED = blue) is provided with a
delay of 30 seconds�
• A simulated alarm (LED = red) is provided without delay�
• During the simulation, [S�On] = On is displayed in the parameter setting
software�
5.6 Binary data transmission (BLOB)
The unit stores the last 20 events and the last 20 calibration check warnings in an
internal ring memory�
• In the [Event log], all events are stored including the operating hours and the
• In the [Calibration check alarm log], all calibration check warnings are stored
including the operating hours, the measured value, the temperature difference
value, the set ccL value and the event status�
6 Installation
►
Before installing and removing the unit make sure that no pressure is
applied to the system and there is no medium in the pipe�
►
Note dangers related to extreme machine / medium temperatures�
6.1 Use in hygienic areas to 3-A
►
Make sure that the sensor is integrated into the system according to 3-A�
►
Use only adapters with 3-A certification and marked with the 3-A symbol
(→ accessories at www.ifm.com.).
The process connection must be provided with a leakage port� This is ensured
when installed using adapters with 3-A approval�
►
For use according to 3-A, take note of the corresponding regulations for
cleaning and maintenance�
Not suitable for use where the criteria for paragraph E1�2/63-03 of the 3-A
standard 63-03 have to be met�
